Application for Equipment Authorization FCC Form 731 TCB Version
Applicant Information
Applicant's complete, legal business name:
JVCKENWOOD Corporation
FCC Registration Number (FRN):
0008154510
Line one:
Engineering & Design Division
Line two:
1-16-2, Hakusan, Midori-ku
P.O. Box:
City:
Yokohama-shi, Kanagawa
State:
N/A
Country:
Japan
Zip Code:
TCB Information
TCB Application Email Address:
tcbinfo@metlabs.com
TCB Scope:
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
FCC ID
Grantee Code:
K44
Product Code:
37313110
Person at the applicant's address to receive grant or for contact
First Name:
Kazuyoshi
Middle Name:
Last Name:
Akaike
Title:
Manager
Telephone Number:
045-939-6254
Extension:
Fax Number:
045-939-6261
Email:
com_techreg_cert_JKC@jvckenwood.com
Mail Stop:
Technical Contact
Firm Name:
First Name:
Middle Name:
Last Name:
Line 1:
Line 2:
P.O. Box:
City:
State:
Country:
Zip Code:
Telephone Number:
Extension:
Non Technical Contact
Firm Name:
First Name:
Middle Name:
Last Name:
Line 1:
Line 2:
P.O. Box:
City:
State:
Country:
Zip Code:
Telephone Number:
Extension:
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:
Yes
Short-Term Confidentiality
Does short-term confidentiality apply to this application?:
No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.
Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?
No
Equipment Class
Equipment Class:
TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed:
(NOTE: This text will appear below the equipment class on the grant):
UHF FM Transceiver
Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?
No
Modular Equipment
Modular Type:
Does not apply
Application Purpose
Application is for:
Original Equipment
Composite/Related Equipment
Is the equipment in this application a composite device subject to an
additional equipment authorization?
No
Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization?
No
Equipment Specifications
Line
Lower
Upper
Power
Tolerance
Emission
Microprocessor
Rule
Grant
1
450
520
30
2.5
ppm
16K0F3E
22,74,90,95A
BC
2
450
520
30
2.5
ppm
11K0F3E
22,74,90.210,95A
BC
3
450
520
30
2.5
ppm
20K0F7D
22,74,90,95A
BC
4
450
520
30
2.5
ppm
11K2F7D
22,74,90.210,95A
BC
5
450
520
30
2.5
ppm
14K4F1D
22,74,90,95A
BC
6
450
520
30
2.5
ppm
7K20F1D
22,74,90.210,95A
BC
7
450
520
5
2.5
ppm
16K0F3E
22,74,90,95A
BF
8
450
520
5
2.5
ppm
11K0F3E
22,74,90.210,95A
BF
9
450
520
5
2.5
ppm
20K0F7D
22,74,90,95A
BF
1
450
520
5
2.5
ppm
11K2F7D
22,74,90.210,95A
BF
11
450
520
5
2.5
ppm
14K4F1D
22,74,90,95A
BF
12
450
520
5
2.5
ppm
7K20F1D
22,74,90.210,95A
BF
Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:
Intertek Japan K.K. Kashima Site
First Name:
Takeshi
Last Name:
Yamanaka
Telephone Number:
81-479-40-1097
Extension:
Fax Number:
81-479-46-1788
E-mail:
Takeshi.Yamanaka@intertek.com
Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation up to 50 W EIRP for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 120 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?
No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:
No
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application
is subject to a denial of Federal benefits, that include FCC benefits, pursuant to
Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction
for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the
definition of a "party" for these purposes.
Does the applicant or authorized agent so certify?
Yes
Applicant/Agent Certification:
I certify that I am authorized to sign this application. All of the statements herein and the
exhibits attached hereto, are true and correct to the best of my knowledge and belief.
In accepting a Grant of Equipment Authorization as a result of the representations made in this
application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID
specified in this application, (2) compliance statement labeling pursuant to the
applicable rules, and (3) compliance of the equipment with the applicable technical rules.
If the applicant is not the actual manufacturer of the equipment, appropriate arrangements
have been made with the manufacturer to ensure that production units of this equipment
will continue to comply with the FCC's technical requirements.
Authorizing an agent to sign this application, is done solely at the applicant's discretion;
however, the applicant remains responsible for all statements in this application.
If an agent has signed this application on behalf of the applicant, a written letter of
authorization which includes information to enable the agent to respond to the above section
5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant.
It is understood that the letter of authorization must be submitted to the FCC upon request,
and that the FCC reserves the right to contact the applicant directly at any time.
Signature of Authorized Person Filing:
Marianne Bosley
Title of authorized signature:
TCB Administrator
Complete items below if agent signs the application:
Firm Name:
First Name:
Middle Name:
Last Name:
Line 1:
Line 2:
P.O. Box:
City:
State:
Country:
Zip Code:
Telephone Number:
Extension:
Search|RSS |Updates |E-Filing |Initiatives |
