TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 05/27/2004

Application Dated: 05/27/2004
JVC KENWOOD Corporation
Communications Systems Division
1-16-2, Hakusan, Midori-ku
Yokohama-shi, Kanagawa-ken,
Japan
 
Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K4437313110
Name of Grantee:  JVC KENWOOD Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF FM Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22, 74, 90, 95A 450.0  -  520.0 30.0 2.5  PM 16K0F3E
BC 22, 74, 95A, 90.210 450.0  -  520.0 30.0 2.5  PM 11K0F3E
BC 22, 74, 90, 95A 450.0  -  520.0 30.0 2.5  PM 20K0F7D
BC 22, 74, 95A, 90.210 450.0  -  520.0 30.0 2.5  PM 11K2F7D
BC 22, 74, 90, 95A 450.0  -  520.0 30.0 2.5  PM 14K4F1D
BC 22, 74, 95A, 90.210 450.0  -  520.0 30.0 2.5  PM 7K20F1D
BF 22, 74, 90, 95A 450.0  -  520.0 5.0 2.5  PM 16K0F3E
BF 22, 74, 95A, 90.210 450.0  -  520.0 5.0 2.5  PM 11K0F3E
BF 22, 74, 90, 95A 450.0  -  520.0 5.0 2.5  PM 20K0F7D
BF 22, 74, 95A, 90.210 450.0  -  520.0 5.0 2.5  PM 11K2F7D
BF 22, 74, 90, 95A 450.0  -  520.0 5.0 2.5  PM 14K4F1D
BF 22, 74, 95A, 90.210 450.0  -  520.0 5.0 2.5  PM 7K20F1D

Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation up to 50 W EIRP for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 120 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.