| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
HCT America, Inc. 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 01/30/2018 |
| JVCKENWOOD Corporation |
| Engineering & Design Division |
| 1-16-2, Hakusan, Midori-ku |
| Yokohama-shi, Kanagawa, Japan |
| Attention: Kazuyoshi Akaike , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K44471100 |
| Name of Grantee: | JVCKENWOOD Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | VHF Digital Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 80 | 150.0 - 174.0 | 50.0 | 2.0 PM | 16K0F3E |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 11K0F3E |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 8K10F1E |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 8K10F1D |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 8K10F1W |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 8K30F1E |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 8K30F1D |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 8K30F7W |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 4K00F1E |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 4K00F1D |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 4K00F7W |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 4K00F2D |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 7K60FXD |
| BC | 22, 74, 80, 90 | 150.0 - 174.0 | 50.0 | 2.0 PM | 7K60FXE |
| Class II Permissive Change. Power output listed is conducted at the antenna connector. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 60cm from all persons. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be greater than 0 dBd. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |