TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 05/09/2003

Application Dated: 05/09/2003
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ492FT5823
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Astro XTL5000
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22, 74, 90 764.0  -  870.0 42.0 1.5  PM 16K0F3E
BC 22, 74, 90 764.0  -  870.0 42.0 1.5  PM 11K0F3E
BC 22, 74, 90 764.0  -  870.0 42.0 1.5  PM 8K10F1D
BC 22, 74, 90 764.0  -  870.0 42.0 1.5  PM 8K10F1E
BC 22, 74, 90 764.0  -  870.0 42.0 1.5  PM 20K0F1E

Output power is conducted maximum. Nominal output power is 35 W. RF exposure compliance was evaluated at 42 W only using 0 dBi or 3.0 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 60 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.