FCC Logo - Return to the FCC Home Page
Office of Engineering and Technology


Print This Window
There have been 4 comment(s) made on this document:
  • Jeffrey Marks commented on 2017-06-14 10:42:11.953:
    The Comments of Nokia are provided in the attached document. View attachment associated with this comment

  • Lee Pucker commented on 2017-06-13 17:00:10.713:
    Comments are in the attached file. View attachment associated with this comment

  • Abner Tsai_SPORTON commented on 2017-05-26 04:10:33.783:
    For 96.41 (f): What type of interfering signal should I use? Can the interfering signal be a 10Mhz E-UTRA (FDD) signal?

  • Abner Tsai commented on 2017-05-08 21:34:56.163:
    1. For 96.41(d), I just need to guarantee that the EUT should respond to SAS commands to adjust power because the SAS will assign CBSDs such that the modeled aggregate power of co-channel CBSDs is no greater than -80 dBm/10 MHz within the PAL. 2. For 96.41 (f), Can I measure at the antenna port (connector) using conducted measurement?

Note: It is important to understand that the staff guidance provided in the KDB is intended to assist the public in following Commission requirements and does not constitute rules. Accordingly, the guidance is not binding on the Commission and will not prevent the Commission from making a different decision in any matter that comes to its attention for resolution.