• Brian Scarpelli commented on 2014-01-10 15:48:43.436:
  The Telecommunications Industry Association (TIA) appreciates this opportunity to submit input on draft KDB Publication 941225 (LTE Rel. 10 KDB Inquiry Sheet). Our input is attached. Please contact us with any questions. Brian Scarpelli Sr. Manager, Government Affairs Telecommunications Industry Association (TIA) d: 703.907.7714 | m: 517.507.1446 BScarpelli@tiaonline.org | tiaonline.org | http://www.tiaonline.org/about/contact-us View attachment associated with this comment

---

• Steve Liu commented on 2014-01-10 14:37:58.64:
  Regarding 3. b) ii): Please clarify what power measurements are required for Carrier Aggregation. Must the uplink power of all RB sizes/offsets/channels described in 941225 D05 be measured with all different combinations of DL combinations? The required volume of measurements would increase significantly. For example, for assuming LTE B4 (DL only) and LTE B17(UL/DL), LTEB17 (mid ch)+LTEB4(low channel), LTE B17(mid)+LTEB4(mid ch), LTE B17 (Mid)+LTEB4(High ch), for each LTE B4/B17 bandwidth? Is it sufficient to only repeat the highest power in non-CA mode additionally with CA?

---

Note: It is important to understand that the staff guidance provided in the KDB is intended to assist the public in following Commission requirements and does not constitute rules. Accordingly, the guidance is not binding on the Commission and will not prevent the Commission from making a different decision in any matter that comes to its attention for resolution.